Home News About Us Contact Contributors Disclaimer Privacy Policy Help FAQ

Quick Search
My eDoc
Session History
Support Wiki
Direct access to
document ID:

          Institute: MPI für Kernphysik     Collection: Nuclear Physics and Nuclear Probes     Display Documents

ID: 31836.0, MPI für Kernphysik / Nuclear Physics and Nuclear Probes
The 7-gap-resonator accelerator for the REX-ISOLDE project at CERN
Authors:Podlech, H.; von Hahn, R.; Repnow, R.; Schwalm, D.
Date of Publication (YYYY-MM-DD):2002-04-22
Title of Journal:Nuclear Physics A
Journal Abbrev.:Nucl. Phys. A
Start Page:651C
End Page:655C
Review Status:Peer-review
Audience:Experts Only
Abstract / Description:The REX-ISOLDE experiment which is presently under construction at CERN is intended to investigate exotic, very neutron-rich, radioactive nuclei. A linear accelerator will deliver radioactive beams which are produced by the isotope separator ISOLDE, with energies between 0.85 and 2.2 MeV/u. The linac will consist of an RFQ accelerator, an interdigital H-structure (IH) and three 7-gap-resonators for variable final energy. The 7-gap-resonators are being operated at a frequency of f = 101.28 MHz with a pulsed power of P = 90 kW (duty cycle I : 10). After the fabrication of the power type resonators, high- power tests were performed in order to prove the design voltage of 1.74 MV at 90 kW rf power. These tests were carried out with a S-32 beam and showed that the 7-gap-resonators exceed their design voltage; voltages between 1.77 and 1.88 MV were reached. In this paper the status of the 7-gap-resonator accelerator and the results of the high-power test are reported. (C) 2002 Elsevier Science B.V. All rights reserved.
Free Keywords:accelerator; linac; RIB
External Publication Status:published
Document Type:Article
Affiliations:MPI für Kernphysik/Group D. Schwalm/Acceleration and Storage Techniques (R. v. Hahn, R. Repnow, M. Grieser)
Identifiers:ISI:000175795900117 [ID No:1]
ISSN:0375-9474 [ID No:2]
The scope and number of records on eDoc is subject to the collection policies defined by each institute - see "info" button in the collection browse view.