Löffler, F., G. Sauthoff and M. Palm: Determination of phase equilibria in the Fe–Mg–Si system. In: International Journal of Materials Research 102, 1042-1047 (2011).
doi: 10.3139/146.110559
Rojas, D., O. Prat, J. Garcia, C. Carrasco, G. Sauthoff and A. R. Kaysser-Pyzalla: Design and Characterization of microstructure evolution during creep of 12%Cr heat resistant steels. In: Materials Science and Engineering A 527, 3864-3876 (2010).
Sket, F., K. Dzieciol, A. Isaac, G. Sauthoff, A. Borbély and A. R. Pyzalla: In-Situ Investigation of Creep and Creep Damage Using Synchrotron Microtomography. (Workshop on X-Ray Micro Imaging of Materials, Devices and Organisms, 2008-10-22 to 2008-10-24, Dresden, Germany).
Isaac, A., F. Sket, K. Dzieciol, G. Sauthoff, A. Borbély and A. R. Pyzalla: In-situ investigation of creep damage using synchrotron X-ray microtomography. (VIII Simpósio Mecanica Computacional, SIMMEC 2008, 2008-07-25 to 2008-07-27, Belo Horizonte, Brazil).
Stein, F., D. Jiang, M. Palm, G. Sauthoff, D. Grüner and G. Kreiner: Experimental reinvestigation of the Co-Nb phase diagram. In: Intermetallics 16, 785-792 (2008).
Stein, F., D. Jiang, M. Palm, G. Sauthoff, D. Grüner and G. Kreiner: Experimental reinvestigation of the Co–Nb phase diagram. In: Intermetallics 16, 6, 785-792 (2008).
doi: 10.1016/j.intermet.2008.02.017
Eumann, M., G. Sauthoff and M. Palm: Phase equilibria in the Fe–Al–Mo system - Part II: Isothermal sections at 1000 and 1150 °C. In: Intermetallics 16, 6, 834-846 (2008).
doi: 10.1016/j.intermet.2008.04.001
Isaac, A., F. Sket, G. Sauthoff and A. Pyzalla: In-situ 3D Quantification of the Evolution of Creep Cavity Size, Shape and Spatial Orientation using Synchrotron X-ray Tomography. In: Materials Science and Engineering A 478, 108-118 (2008).
Sket, F., A. Isaac, K. Dzieciol, G. Sauthoff, A. Borbély and A. R. Pyzalla: In-situ tomographic investigation of brass during high-temperature creep. In: Scripta Materialia 59, 5, 558-561 (2008).
Isaac, A., F. Sket, A. Borbély, G. Sauthoff and A. R. Pyzalla: Study of cavity evolution during creep by synchrotron microtomography using a volume correlation method. In: Praktische Metallographie/Practical Metllography 45, 5, 242-245 (2008).
http://edoc.mpg.de
The Max Planck Society does not take any responsibility for the content of this export.